SVP Sectional Vulcanzer Press For Rubber Conveyor Belt

SVP Sectional Vulcanzer Press For Rubber Conveyor Belt

New type Vulcanizing Press with E type cross beam, one kind of heavyweight vulcanizer, use new design components, include flexible pressure bag, traverse bars with standard heating platen and controller. Learn from Canada brand similar products.

Product Detail:
What’s ASVP-E series and what it can do: The ASVP-E sectional has uniform pressure bag and aluminum/steel bolt and high-grade aluminum platens and beams with high safety grade. This belt joint/splice system designed to be portable and easy to set-up and remove from the site. We can manufacture to all sizes and pressure up to 1.8 Mpa or more required for different fabric belts and steel-cord belts. TECHNICAL PARAMETERS
  • Water pressure bag (also can use air pressure) Press for 100PSI200PSI surface pressure for textile and steel cord belts, Up to 1.8Mpa/2.0Mpa.
  • 100 p.s.i.(7 kg/cm sq.) units mostly suitable for splicing fabric ply belting
  • 200 p.s.i.(14 kg/cm sq.) units usually used to do steel cord conveyor belting
  • Max Belt width: from 650mm to3000mm
  • Different heating platen size and combination.
  • Degree of the heating platen: 22 degree bias angle or 16 degree, 20 degree, rectangle and other degree is optional.
  • Power Voltage: 380V. 660V. 525V480V. 440V. 415V. 400V or 220V
  • Vulcanizing temperature:145℃ (adjustable 0~200℃)
  • Temperature-rising time (from normal temperature to vulcanizing temperature): no more than 25 min, accords to different conditions, actually, normal conditions, is around 20 mins.

Improved cooling system, when use pressure pump for cooling, cooling time only 5mins (cooling from 145 to 75 degrees)

When order, pls supply below information, our technician will make a solution for you, or pls choose one model from bottom traditional sizes table

  1. Max belt width
  2. Heating platen length (or pls supply belt manufacturer’s recommended splice length)
  3. What kind of belt, light duty belts or heavy duty belts, belt model No.
  4. Working Voltage
  5. Pressure requirements (as our experience, normal is 0.8Mpa, for EP belts is 1.2Mpa, for steel cord belts is 1.4Mpa)
  6. Degree of heating platen (standard will be 22 degree)

Normal vulcanizer model sheet:

A=Length of platen along belt

B=Width of platen across the belt on the bias

C=Right angle dimension across the belt, plus edge overlap

D=Bias angle

E=Max Splice length

Specifications of ASVP series Belt Joint Vulcanizing Machine
100 PSI(7kg/cm sq.) units suitable for splicing steelcord conveyor belting
Model
Number
Max Belt Width(in)Platen DimensionsMax Splice LengthSpanner BarsQty Bolt/Nut Assy.Main Component Weights
A(mm)B(mm)C(mm)QTYTypeLengthPlatenBarBolt/
Nut
Assy.
Total
Weight
inmminmminmminmminmminmmkgkgkgkg
ASVP193024610194803076028705133302 setsEA421065425248225
ASVP193730760194803794034870133302 setsEA491245431288255
ASVP19433691519480431090401015133302 setsEA551395436318281
ASVP26433691526660431090401015205103 setsEA551397649318405
ASVP28433691528710431090401015225603 setsEA551397653318416
ASVP33433691533840431090401015276854 setsEA551397862318522
ASVP37433691537940431090401015317854 setsEA551397870318544
ASVP195042106519480501270461175133302 setsEA621574442358311

Note:

  1. Specifications are subject to change without notice;
  2. Build-in  cooling standard on all units;
  3. Total weights include electrical control panel, cable set and set up templates for all models;
  4. 200 PSI models include fluid pressure pump and reservoir unit Model HPP20-4(mandatory for operating pressure above 100PSI/7 kg/cm sq);
  5. Temperature adjustable between 0-199deg.C;
  6. Sectional vulcanizers are built on a 22 degree bias, 16/20 or other degree are optional;
  7. Custom sizes, rectangular configurations and multiple platen arrangements available on request.

Main Componets:
Aluminum Frame (Spanner Bars), made of high quality aluminum are engineered for any belt width or operating pressure. From EA up to E380.

Get A Quote